This Decree sets the requirements that must be met by office and primary or secondary education buildings, in respect of energy design, energy consumption, climate change impacts, and limitation of discomfort during the summer.
Decree on the energy and environmental performance requirements for the construction of office and primary or secondary education buildings in metropolitan France (No. 2022-305 of 1 March 2022)
Documents
Each policy in our database can contain one or more documents.
Summary
Part of a collection
France Environmental Regulations RE2020
The RE 2020 is the new energy and environmental regulations for all new construction. It introduces environmental performance in new construction via life cycle analysis.
The RE2020 applies in several stages:
- initially, it concerns: individual houses and collective housing;
- secondly, it concerns: primary and secondary education offices and buildings;
- in a third step, it concerns specific tertiary buildings: hotels, shops, gymnasiums.
RE is broken down broadly into three areas: energy; comfort and carbon. ‘Energy’ relates mainly to the energy consumption required while the building is in operation, which is now based on CO2 emissions rather than kilowatt hours. This is referred to as ‘energy carbon impact’ in RE2020. ‘Comfort’ refers to the amount of discomfort permitted in hot weather. The regulations limit the maximum indoor temperature a building can reach during five consecutive hot summer days. ‘Carbon’ measurements are the climate-change impact of the construction itself, including the building materials and the construction process. This is known as the construction carbon impact, which will reduce significantly over the years, by 2025, 2028 and 2031.
The RE2020 applies in several stages:
- initially, it concerns: individual houses and collective housing;
- secondly, it concerns: primary and secondary education offices and buildings;
- in a third step, it concerns specific tertiary buildings: hotels, shops, gymnasiums.
RE is broken down broadly into three areas: energy; comfort and carbon. ‘Energy’ relates mainly to the energy consumption required while the building is in operation, which is now based on CO2 emissions rather than kilowatt hours. This is referred to as ‘energy carbon impact’ in RE2020. ‘Comfort’ refers to the amount of discomfort permitted in hot weather. The regulations limit the maximum indoor temperature a building can reach during five consecutive hot summer days. ‘Carbon’ measurements are the climate-change impact of the construction itself, including the building materials and the construction process. This is known as the construction carbon impact, which will reduce significantly over the years, by 2025, 2028 and 2031.
Other documents in this collection:
- Decree on the environmental declaration of construction and decoration products as well as electrical, electronic and climate engineering equipment (No. 2021-1674 of 16 December 2021)
- Order on the environmental declaration of products intended for use in building works and the environmental declaration of products used for the calculation of the environmental performance of buildings (14 December 2021)
- Decree on energy and environmental performance requirements for building construction in metropolitan France (No. 2021-1004 of 29 July 2021)
- Environmental Regulations RE2020
- Order on certificates of taking into account energy and environmental performance requirements and carrying out a feasibility study on the various energy supply solutions for building construction in metropolitan France (9 December 2021)
- Decree on the energy and environmental performance requirements for the construction of office and primary or secondary education buildings in metropolitan France (No. 2022-305 of 1 March 2022)
Note
The summary of this document was written by researchers at the Grantham Research Institute . If you want to use this summary, please check terms of use for citation and licensing of third party data.